Silastic high temperature and high pressure oil line 
 1, standard: Q/32083JH001-2000, 
 2, the long-term use temperature: Cable Operating Temperature -60 ℃ ~ 180 ℃ 
 3, the use of 
 JGG for AC rated voltage: 600V, for of 10,000 V and insulated electrical lead wire. 
 JHXG for AC rated voltage 1140V and below class F, class H insulated motor lead wiring, widely used in navigation, national defense, trains and other high-power motor. 
 For YGZ, YGZB, YGC, YGCB AC rated voltage 450V/750V and a variety of portable electrical equipment circuit connection for high-temperature environment of the iron and steel, metallurgy industry. 
 4, Rated voltage: 300/500V 

 ? Model nominal cross section 
 (M m) conductor structure 
 Root / diameter, insulation thickness mm Number of cores 



 YGZ 

 YGZB 

 Medium-sized 0.75 24/0.20 0.6 


 37 core and the following 
 1.0 32/0.20 0.6 
 1.5 30/0.25 0.7 
 2.5 49/0.25 0.8 

 Type Nominal cross-section 
 (M m) conductor structure 
 Root / diameter, insulation thickness mm Number of cores 



 YGC 

 YGCB 

 Heavy 
 4 56/0.30 1.0 2-19 
 6 84/0.30 1.0 2-10 

 10 84/0.40 1.2 
 16 126/0.40 1.2 




 2-5 
 25 196/0.40 1.4 
 33 279/0.40 1.4 
 50 396/0.40 1.6 
 70 360/0.50 1.6 
 95 475/0.50 1.8 

 Model JGG 
 Insulation thickness (mm) Number of cores 



 Nominal cross section (m ㎡) conductor structure of the root number / diameter 6KV 10KV 6KV 10KV 
 6 3 3.4 11 12 84/0.30 
 10 84/0.40 3 3.4 12.2 13.1 
 16 96/0.40 3.2 3.6 13.9 14.8 
 25 126/0.40 3.2 3.6 15.5 16.5 
 35 276/0.40 3.4 3.8 17.6 18.5 
 50 396/0.50 3.4 3.8 18.8 19.7 
 70 396/0.50 3.6 4 21.6 22.4 
 95 475/0.50 3.6 4 23.9 24.8 

 Model JGG 



 Nominal cross section (m m) conductor structure of the root number 
 / Diameter, outside diameter mm nominal cross section (m m) conductor structure of the root of the number of 
 / Diameter OD (mm) 
 0.75 24/0.20 3.4 16 126/0.40 9.2 
 A 32/0.20 3.6 25 196/0.40 11 
 1.5 30/0.25 3.8 35 276/0.40 13 
 2.5 49/0.25 4.7 50 396/0.40 15 
 56/0.30 5.5 70 360/0.50 17.3 
 6 84/0.30 695 475/0.50 20.1 
 10 84/0.40 7.6 120 608/0.50 25.5 

 5 wires connected high-voltage rectifier silicon with CRT high voltage pole, as well as other electronic instruments for the connection of the high-pressure apparatus within the television receiver output transformer. 
 Type Nominal cross-section 
 (M m) conductor structure 
 Root / diameter, insulation thickness mm Number of cores 
 AGG-5 0.2 7/0.2 1.0 24-2.7 
 AGG-12 0.2 7/0.2 1.3 2.9-3.2 
 AGG-15 0.2 7/0.2 1.7 3.7-4.0 
 AGG-20 0.2 12/0.15 1.8 3.9-4.2 
 AGG-25 0.2 12/0.15 2.8 5.8-6.2 
 AGG-30 0.2 12/0.15 2.2 6.5-7.0 

 6, the wires for AC rated voltage 500V and below the electrical installation, wire and long-term operating temperature ≥ 180 ℃ 
 Type Nominal cross-section 
 (M m) conductor structure 
 Root / diameter, insulation thickness mm OD mm 
 AGR-1 

 AGR 

 AGRP 0.06 7/0.10 0.4 0.7 1.33 2.06 2.76 
 0.12 7/0.15 0.4 0.7 1.52 2.24 2.88 
 0.2 12/0.15 0.4 0.7 1.72 2.44 3.17 
 0.3 16/0.15 0.5 0.7 2.07 2.55 3.28 
 0.4 23/0.15 0.5 0.7 2.3 2.78 3.51 
 0.5 25/0.15 0.5 0.7 2.43 2.92 3.64 
 AGR 

 AGRP 0.75 42/0.15? 0.7? 3.22 3.95 
 A 32/0.20? 0.7? 3.40 4.11 
 1.5 30/0.25? 0.7? 3.76 4.49 
 2 60/0.20? 0.8? 4.48 5.2 
 2.5 49/0.25? 1.0? 5.43 6.16 
 4 56/0.30? 1.0? 6.34 7.06 
 6 84/0.30? 1.0? 7.25 7.95 
 10 84/0.40? 1.0? 8.71 9.44 
 7, for 220-500V transmission line insulated overhead ground wire of the power outage AC transmission and distribution systems and electrical equipment and portable temporary short-circuit grounding in the laboratory and test equipment grounding wire, cable long-term allowable working temperature: -60 ℃ ~ 180 ℃. 
 8, the wire for rated voltage 600V motor, the electrical connection to use. It the biggest advantages of acid water, concentrated alkali resistance and chemical resistance. The finished insulation is subjected to the breakdown of AC 50Hz voltage 4000V spark test, finished to withstand the power frequency of 500V voltage test one minute without breakdown. 
 Type Nominal cross-section 
 (M m) conductor structure 
 Root / diameter, insulation thickness mm Number of cores 
 DTRJ-11 16 513/0.20 1.0 10.1 
 25 798/0.20 1.01 11.5 
 35 1121/0.20 1.0 13 
 50 1596/0.20 1.2 14.5 
 70 2214/0.20 1.2 17.0 
 95 2997/0.20 1.2 18.5 
 120 3811/0.20 1.2 20.5 


 Heat resistant silicone rubber insulated and sheathed control cable 
 1, uses 
 This product is suitable for high-temperature industrial iron and steel, smelting, power plants, coking plants, aviation, metallurgy machinery, petroleum and chemical, rated voltage the 450V/750 and the following control and temporary loop. It has excellent high temperature, flame retardant, radiation-resistant, resistant to aging and ozone, water and other characteristics, but also has good cold resistance, weather resistance. 
 2, the implementation of standards 
 To adopt Q/320831JH003-2000 standards 
 3, conditions of use 
 Operating temperature -50 ℃ ~ 180 ℃, the recommended bend radius is not less than six times the cable diameter. 
 Excellent oxidation resistance, ozone resistance, resistance to ultraviolet radiation performance, long-term outdoor use without cracking occurs; 
 Excellent electrical properties, resistance to corona and arc resistance is also very good; 
 Excellent mechanical properties, high temperature of 150 ℃, the mechanical properties far superior to general-purpose rubber sheath flexible cable; has good chemical resistance, resistance to fuel oil and oil properties. 
 Odorless, tasteless, non-toxic, with a low surface activity and buy low, sell-temperature performance. 
 4, model name and specifications 
 Model Name 
 Specification 
 Number of cores Nominal cross section 
 KGG copper core silicone rubber insulated silicone rubber sheath control cable 2-37 1.5, 2.5 
 4,6,10 
 KGGP copper core silicone rubber insulated silicone rubber sheath braided shielded control cable 2-37 1.5, 2.5 
 4,6,10 
 Copper core silicone rubber insulated silicone rubber sheath, KGGP2 copper tape shield control cable 2-37 1.5, 2.5 
 4,6,10 
 KGG22 copper core silicone rubber insulated silicone rubber sheathed copper tape armored control cable 2-37 1.5, 2.5 
 4,6,10 
 KGG32 copper core silicone rubber insulated silicone rubber sheath fine steel wire armored control cables 2-37 1.5, 2.5 
 4,6,10 
 KGGR copper core silicone rubber insulated silicone rubber sheathed flexible control cable 2-37 1.5, 2.5 
 4,6,10 
 KGGRP copper core silicone rubber insulated silicone rubber sheath woven shield soft cable 2-37 1.5,2.5 
 4,6,10 
 5, the main technical indicators 
 Products should be subjected to test voltage 2500V AC 50Hz, 5 minutes without breakdown. 
 The insulation resistance between the cable core and the wire core (20 ℃) ??is not less than 103Ω · Km. 
 6, delivery length 
 Cable delivery length of not less than 100 meters, the allowable length of not less than 50 meters short head delivery, their number does not exceed the delivery of 10% of the total length of. 
 Under the agreement, the delivery of any length. 

 Third, fluorine plastic insulation silicon rubber sheath high temperature resistant control cable 
 1, uses 
 For rated voltage of 450V/750V and the following control monitoring circuit, aviation, metallurgy, petroleum, chemical industry, power plants and other industries in the high-temperature industrial it has a high temperature, flame retardant, radiation resistance, aging resistance, ozone resistance, waterproof and other features, also has very good cold resistance, weather resistance. 
 2, the implementation of standards: Q/320831JH004-2000 
 3, the implementation of conditions 
 Rated voltage: U0 / U 450/750V and below 
 Temperature: the maximum conductor temperature: +260 ℃ 
 Ambient temperature: fixed laying -30 ℃ to +180 ℃ 
 Fixed installation: -50 ℃ ~ +180 ℃ 
 Excellent oxidation resistance, ozone, UV irradiation performance, long-term outdoor use is not cracked and off the mark. 
 Excellent electrical properties, resistance to corona and arc resistance is also very good. 
 Odorless, tasteless, non-toxic, with a low surface activity and low moisture absorption. 
 4, model name and specifications 
 Model Name 
 Specification 
 Number of cores Nominal cross section 
 YGC-KF46R copper core fluoroplastic insulated silicone rubber sheathed flexible control cable 2-37 1.5, 2.5 
 4,6,10 
 YGC-KF46RP copper core fluorine plastic insulation silicon rubber sheath braided shield flexible control cable 2-37 1.5, 2.5 
 4,6,10 
 YGC-KF46RP2 copper core fluorine plastic insulation silicon rubber sheath copper tape shield flexible control cable 2-37 1.5, 2.5 
 4,6,10 
 YGC-KF46 copper core fluorine plastic insulation silicon rubber sheath control cable 2-37 1.5, 2.5 
 4,6,10 
 YGC-KF46P copper core fluorine plastic insulation silicon rubber sheath braided shielded control cable 2-37 1.5, 2.5 
 4,6,10 
 YGC-KF46P2 copper core fluorine plastic insulation silicon rubber sheath copper tape shield control cable 2-37 1.5, 2.5 
 4,6,10 
 YGC-KF46-22 copper core fluorine plastic insulation silicon rubber sheath steel tape armored control cable 2-37 1.5, 2.5 
 4,6,10 
 YGC-KF46-32 copper core fluorine plastic insulation silicon rubber sheath fine steel wire armored control cables 2-37 1.5, 2.5 
 4,6,10 
 5, the main technical indicators 
 Products should be subjected to AC 50Hz, rated voltage 600V, test voltage 2500V, 5 minutes without breakdown. 
 The insulation resistance between the cable core and the wire core (20 ℃) ??is not less than 103Ω · Km. 
 6, delivery length 
 Cable delivery length of not less than 100 meters, the allowable length of not less than 50 meters short head delivery, their number does not exceed the delivery of 10% of the total length of. 
 Under the agreement, the delivery of any length. 

 Fourth, fluorine plastic insulation silicon rubber sheath high temperature power cables 
 1, uses 
 The altar transmission of the flammable high temperature environment of the petroleum, chemical, metallurgy, mining, glass, ceramics, pharmaceuticals, steel, electricity and other electrical equipment. 
 2, product standards: Q/320831JH005-2000 reference GB12527-90 
 3, conditions of use 
 Rated voltage: U0 / U 0.6/1KV and below 
 Temperature: conductivity maximum temperature: +260 ° C? Ambient temperature: fixed laying -30 ℃ ~ +180 ℃? Fixed installation: -50 ℃ ~~ +180 ℃ 
 Allowable bending radius of not less than 8 times the cable diameter. 
 4, the model name 

 HF46G tinned copper, FEP insulated silicone rubber sheathed power cable 
 HF46GP2 tinned copper, FEP insulated copper tape shielded power cables 
 HF46G22 tinned copper, FEP insulated silicone rubber sheathed power cable 
 HF4G tinned copper, PFA insulated silicone rubber sheathed power cable 
 HF4GP2 tinned copper, PFA insulated copper tape shielded power cable 
 HF4G22 tinned copper core of PFA insulated silicone rubber sheathed power cable 
 Note: The code table FEP-the polychlorinated B propylene, of PFA-fusible polytetrafluoroethylene 
 5, the model name 
 Conductor core 1 core 2 core 3 core 4 core, 3 +1 core 5 core, 4 +1 cores, 3 +2 core 
 Conductor cross-section 1.5-800 1.5-800 1.5-800 4-3004-185 
 6, the main technical indicators 
 The core of the insulated wire can withstand AC 50Hz 3500V/5min voltage test without breakdown 
 Cable insulation resistance (20 ℃) ??is not less than 100MΩ · km. 
 The cable can be long-term work in the specified temperature. 
 Cable DC resistance (20 ℃) ??ordinary cable DC resistance requirements. 
 The product has excellent weather resistance, flame retardant, resistant to aging and radiation. 
 7, delivery length 
 Cable delivery length of not less than 100 meters, the allowable length of not less than 50 meters short head delivery, their number does not exceed the delivery of 10% of the total length of. 
 Under the agreement, the delivery of any length. 

 www.jinhuayb.com www.jhyb.cn